Quality
Quality
A case fails at the handover points, not in the middle of a process. These are the checkpoints an order passes through.
Process control
Process control
- 01
Incoming material
TPU, PC, silicone compound, glass, films and magnets checked on arrival against the approved specification.
- 02
Production
Moulding and forming, with first-off pieces compared to the golden sample before the run continues.
- 03
Surface / printing process
UV print, gilding, embossing, plating or laser — checked for registration, colour and coverage.
- 04
Assembly
Layers, inserts and magnet arrays brought together; bond lines and seating checked.
- 05
Appearance inspection
Surface defects, colour deviation, edge finish, print alignment, contamination.
- 06
Functional check
Fit on the model, port and camera alignment, button feel, magnetic seating where applicable.
- 07
Packaging
Correct insert, correct pack format, correct labelling and barcode for the programme.
- 08
Shipment
Carton count, carton marks and documents verified against the order before release.
This sequence is a template. Exact stages, sampling rates and acceptance criteria should be set against the factory SOP for your programme before it is published as a commitment.
Figures we have not published
Figures we have not published
Defect rates, AQL levels, inspection sampling ratios and test-lab reports are deliberately absent from this page. None were supplied with the product catalog, and we would rather quote nothing than quote a number we cannot evidence. Send us your acceptance standard and we will answer against it.